Compliant with EN 354:2010; EN 795 B:2012; TS 16415:2013; ANSI/ASSE Z359.18:2017.
Equipment description:
Type: Safety lanyard and anchor sling.
Construction: Core of load-bearing strands covered by an outer tubular sheath that provides a compact shape and protects the core against abrasion and external agents.
Purpose: Designed for use as a safety lanyard and as an anchor sling in fall protection systems.
Mechanical performance:
Breaking strength: > 100 kN (over 100 kilonewtons), equivalent to > 22,480 lbf (pound-force).
Available lengths (m → ft/in, approximate):
0.5 m → 0.5 m (≈ 1.64 ft ≈ 19.7 in)
0.8 m → 0.8 m (≈ 2.62 ft ≈ 31.5 in)
1.0 m → 1.0 m (≈ 3.28 ft ≈ 39.4 in)
1.2 m → 1.2 m (≈ 3.94 ft ≈ 47.2 in)
1.5 m → 1.5 m (≈ 4.92 ft ≈ 59.1 in)
1.8 m → 1.8 m (≈ 5.91 ft ≈ 70.9 in)
2.0 m → 2.0 m (≈ 6.56 ft ≈ 78.7 in)
Regulatory compliance and safety:
Designed and tested to exceed the strength and performance requirements established by EN 354, EN 795 B, TS 16415, and ANSI/ASSE Z359.18. Intended use: connection between the harness and the anchor point, or as a rigid or semi-rigid anchor sling, depending on the installation procedure and compatibility with fall protection system components.
Pre-use inspection: visually check the integrity of the sheath and core (absence of cuts, deep abrasions, burns, or chemical damage), labels, and markings; ensure that lengths and end terminations match the required application.
Service life and maintenance: follow the manufacturer's instructions and applicable standards; remove from service if damage, impact loading, or signs of aging that compromise strength are detected.
Recommended additional information (to be confirmed with the manufacturer):
Specific core and sheath materials.
Diameter or cross-section of the cord/sling.
Test methods and values (test procedure, number of samples).
Storage, cleaning, and marking instructions.
For orders and further technical data (material specifications, test reports, and certificates of conformity), please specify the required length and intended application so that we can provide the appropriate documentation and compatible accessories.
Compliant with EN 354:2010; EN 795 B:2012; TS 16415:2013; ANSI/ASSE Z359.18:2017.
Equipment description:
Type: Safety lanyard and anchor sling.
Construction: Core of load-bearing strands covered by an outer tubular sheath that provides a compact shape and protects the core against abrasion and external agents.
Purpose: Designed for use as a safety lanyard and as an anchor sling in fall protection systems.
Mechanical performance:
Breaking strength: > 100 kN (over 100 kilonewtons), equivalent to > 22,480 lbf (pound-force).
Available lengths (m → ft/in, approximate):
0.5 m → 0.5 m (≈ 1.64 ft ≈ 19.7 in)
0.8 m → 0.8 m (≈ 2.62 ft ≈ 31.5 in)
1.0 m → 1.0 m (≈ 3.28 ft ≈ 39.4 in)
1.2 m → 1.2 m (≈ 3.94 ft ≈ 47.2 in)
1.5 m → 1.5 m (≈ 4.92 ft ≈ 59.1 in)
1.8 m → 1.8 m (≈ 5.91 ft ≈ 70.9 in)
2.0 m → 2.0 m (≈ 6.56 ft ≈ 78.7 in)
Regulatory compliance and safety:
Designed and tested to exceed the strength and performance requirements established by EN 354, EN 795 B, TS 16415, and ANSI/ASSE Z359.18. Intended use: connection between the harness and the anchor point, or as a rigid or semi-rigid anchor sling, depending on the installation procedure and compatibility with fall protection system components.
Pre-use inspection: visually check the integrity of the sheath and core (absence of cuts, deep abrasions, burns, or chemical damage), labels, and markings; ensure that lengths and end terminations match the required application.
Service life and maintenance: follow the manufacturer's instructions and applicable standards; remove from service if damage, impact loading, or signs of aging that compromise strength are detected.
Recommended additional information (to be confirmed with the manufacturer):
Specific core and sheath materials.
Diameter or cross-section of the cord/sling.
Test methods and values (test procedure, number of samples).
Storage, cleaning, and marking instructions.
For orders and further technical data (material specifications, test reports, and certificates of conformity), please specify the required length and intended application so that we can provide the appropriate documentation and compatible accessories.
Our crew has operated on the facades, rooftops, and glass curtains of South Florida's high-rises since 1986. In 2025, we opened the area's first physical rope access equipment store. No mountains — just buildings, ropes, and 40 years of urban experience. Skyhanger Store carries only what we trust on the job.
We've been working at heights for over four decades. We know what works — and what doesn't.
Every item in our inventory meets OSHA and ANSI safety standards. No compromises when lives are on the line.
Our staff are active rope access technicians. We give real-world advice on every purchase — not just product specs.
Located in Dania Beach, FL. Walk in, handle the equipment, and leave the same day fully geared up.
We exclusively carry brands we trust in the field — starting with EDELRID, a world leader in vertical safety systems.
Visit us in Dania Beach or shop online. Our team is ready to help you find the right equipment for your job.
New products, safety tips, and exclusive deals — straight to your inbox.
South Florida's first physical rope access equipment store. Opened 2025, backed by 40+ years of field experience. Professional gear for vertical professionals.
🛡️ All items are OSHA & ANSI certified · 📍 In-store pickup available in Dania Beach, FL · 📞 Questions? Call (954) 228-5661
Professional rope access and safety equipment from EDELRID and NLG. OSHA & ANSI certified. Ships from Dania Beach, FL.